How to take your measurements correctly for a custom-made wedding dress?

Are you interested in one of our wedding dresses and worried about taking your measurements incorrectly? 

Don't worry, you're in the right place! We'll guide you so you can take your measurements accurately before ordering your custom-made wedding dress.

• Measure yourself in undergarments and barefoot to get the most accurate results possible.

• Take your measurements in front of a mirror to ensure their accuracy. If necessary, ask for the help of a trusted person, but keep in mind that an outside seamstress's measuring methods may differ from our guide, which could lead to inconsistencies. Be sure to show them our guide so they follow the same instructions.

• Be careful not to pull the measuring tape too tight, especially around the hips and buttocks for mermaid-style dresses, to avoid any compression effect.

• Anticipate the possibility of alterations by having a skilled seamstress on hand, as even custom-made dresses may require minor adjustments for a perfect result.

• Prefer a dress with a back lace-up closure to make adjustments easier and ensure a perfect fit.

• Order your dress between 6 and 8 months before the event to avoid any time-related stress and have enough time for any necessary alterations.

 

We make our designs according to the measurements you provide. Be sure to check them several times to ensure their accuracy and get the wedding dress of your dreams.

To measure your bust correctly, wrap the measuring tape around the fullest part of your bust, passing precisely over the points of your breasts, and make sure the tape is straight and horizontal all around your back. 

It is important to note that this measurement does not correspond to your bra size. For increased accuracy, your arms should be relaxed and held along your body.

In addition, it is advisable to wear the bra you plan to use with your dress on the big day for this measurement. This will ensure that your dress size perfectly matches the support and profile that your lingerie will provide, thus avoiding any unexpected adjustments.

Another tip : take your measurement in a quiet place where you feel comfortable, this will help ensure that you are relaxed and that your posture is natural during the measurement, which is crucial for getting accurate results.

To determine the measurement of your natural waist, target the narrowest part of your waist. 

Place the measuring tape around this area, making sure to keep it parallel to the floor for optimal accuracy. One trick to find your natural waist is to lean slightly to the side; the hollow that naturally forms at your torso indicates the exact point to take the measurement.

It is crucial to ensure that the tape is neither too tight nor too loose and that it rests comfortably against your body without pinching your skin. Taking this measurement carefully and accurately will ensure that your clothes, especially fitted ones like certain dresses, will fit your silhouette flatteringly, highlighting your natural shape.

Don't forget to breathe normally and stay relaxed during the measurement. This will help you get results true to your actual size, thus ensuring a comfortable and elegant fit for your outfits.

To accurately measure the circumference of your hips at the widest point, it is essential to find the right position on your body. This area is generally located between 17 and 22 cm below the natural waist, but this distance can vary slightly from person to person.

To locate it, stand straight and feel with your hands the most prominent part of your buttocks, which generally represents the widest point.

Once this area is identified, wrap the measuring tape around your hips, making sure it is flat against your body and that it does not twist.

The tape must remain perfectly horizontal and parallel to the floor all around your body to ensure the accuracy of the measurement.

It is also important to stand straight but relaxed, with your feet slightly apart, for a natural posture.

Avoid holding your breath or sucking in your stomach during the measurement, as this could skew the results.

Adopt a straight posture and start by locating the center of your collarbone. From there, measure downwards to the desired spot, depending on the style of dress you are considering.

• Make sure you are not wearing shoes during the measurement to get an accurate length of the garment relative to your natural height.
• For a long dress, the measuring tape should extend to the floor. Take into account your height and the way you want the dress to fall around your feet.
• If you prefer a short dress, measure to the exact spot where you would like the hem of the dress to end, whether above the knee, at knee level, or just below.

Taking the measurement of the heel height is essential to ensure that your wedding dress or any other garment is optimally fitted, taking into account the length you want to wear.

Follow these simple steps to get an accurate measurement.

1. Place the heels on a flat surface:
   
   Place your heeled shoes on a flat and stable surface. Make sure the heels are aligned straight to get an accurate measurement.

2. Locate the lowest point of the heel:
   
   Identify the point of contact between the heel of the shoe and the flat surface. This point corresponds to the lower end of the heel.

3. Locate the highest point of the heel:
   
   Identify the top of the heel, that is, the place where it meets the sole of the shoe. This is the starting point of the measurement.

4. Measure the height:
   
   Use a measuring tape or a ruler to measure the distance between the lowest point of the heel (on the flat surface) and the top of the heel (where it meets the sole). Make sure to keep the measuring tape or ruler perfectly straight to avoid any deviation.

5. Do not include the platform (if applicable): 
   
   If your heels have a platform at the front, do not include it in the measurement of the heel height. Measure only the back part of the heel, from the base to its top.

6. Write down the measurement:
   
   Once you have the measurement, write it down for reference. This is the height that will be taken into account to adjust the length of your dress or clothes.

After carefully taking your measurements, the time has come to choose the wedding dress of your dreams! Browse our selection and, once you have found your favorite, simply go to the section dedicated to entering your personal measurements.

Easy steps to follow:

1. Select the wedding dress that won you over.
2. Enter your measurements in the corresponding fields carefully to ensure a perfect fit.

That's it! We'll take care of the rest, making sure that your wedding dress is fitted to perfection, so that you are absolutely resplendent on the big day.